Deploying MediaGoblin

GNU MediaGoblin is fairly new, and so at the time of writing there aren’t easy package-manager-friendly methods to install it. However, doing a basic install isn’t too complex in and of itself. Following this deployment guide will take you step-by-step through setting up your own instance of MediaGoblin.

Of course, when it comes to setting up web applications like MediaGoblin, there’s an almost infinite way to deploy things, so for now, we’ll keep it simple with some assumptions. We recommend a setup that combines MediaGoblin + virtualenv + fastcgi + nginx on a .deb- or .rpm-based GNU/Linux distro.

Other deployment options (e.g., deploying on FreeBSD, Arch Linux, using Apache, etc.) are possible, though! If you’d prefer a different deployment approach, see our Deployment wiki page.

Note

These tools are for site administrators wanting to deploy a fresh install. If you want to join in as a contributor, see our Hacking HOWTO instead.

Note

Throughout the documentation we use the sudo command to indicate that an instruction requires elevated user privileges to run. You can issue these commands as the root user if you prefer.

If you need help configuring sudo, see the Debian wiki or the Fedora Project wiki.

Prepare System

Dependencies

MediaGoblin has the following core dependencies:

On a DEB-based system (e.g Debian, gNewSense, Trisquel, *buntu, and derivatives) issue the following command:

sudo apt-get install git-core python python-dev python-lxml \
    python-imaging python-virtualenv npm nodejs-legacy automake \
    nginx

On a RPM-based system (e.g. Fedora, RedHat, and derivatives) issue the following command:

sudo yum install python-paste-deploy python-paste-script \
    git-core python python-devel python-lxml python-imaging \
    python-virtualenv npm automake nginx

(Note: MediaGoblin now officially supports Python 3. You may instead substitute from “python” to “python3” for most package names in the Debian instructions and this should cover dependency installation. These instructions have not yet been tested on Fedora.)

Configure PostgreSQL

Note

MediaGoblin currently supports PostgreSQL and SQLite. The default is a local SQLite database. This will “just work” for small deployments.

For medium to large deployments we recommend PostgreSQL.

If you don’t want/need postgres, skip this section.

These are the packages needed for Debian Jessie (stable):

sudo apt-get install postgresql postgresql-client python-psycopg2

These are the packages needed for an RPM-based system:

sudo yum install postgresql postgresql-server python-psycopg2

An rpm-based system also requires that you initialize and start the PostgresSQL database with a few commands. The following commands are not needed on a Debian-based platform, however:

sudo /usr/bin/postgresql-setup initdb
sudo systemctl enable postgresql
sudo systemctl start postgresql

The installation process will create a new system user named postgres, which will have privilegies sufficient to manage the database. We will create a new database user with restricted privilegies and a new database owned by our restricted database user for our MediaGoblin instance.

In this example, the database user will be mediagoblin and the database name will be mediagoblin too.

We’ll add these entities by first switching to the postgres account:

sudo su - postgres

This will change your prompt to a shell prompt, such as -bash-4.2$. Enter the following createuser and createdb commands at that prompt. We’ll create the mediagoblin database user first:

# this command and the one that follows are run as the ``postgres`` user:
createuser -A -D mediagoblin

Then we’ll create the database where all of our MediaGoblin data will be stored:

createdb -E UNICODE -O mediagoblin mediagoblin

where the first mediagoblin is the database owner and the second mediagoblin is the database name.

Type exit to exit from the ‘postgres’ user account.:

exit

Caution

Where is the password?

These steps enable you to authenticate to the database in a password-less manner via local UNIX authentication provided you run the MediaGoblin application as a user with the same name as the user you created in PostgreSQL.

More on this in Drop Privileges for MediaGoblin.

Drop Privileges for MediaGoblin

MediaGoblin does not require special permissions or elevated access to run. As such, the preferred way to run MediaGoblin is to create a dedicated, unprivileged system user for the sole purpose of running MediaGoblin. Running MediaGoblin processes under an unprivileged system user helps to keep it more secure.

The following command (entered as root or with sudo) will create a system account with a username of mediagoblin. You may choose a different username if you wish.

If you are using a Debian-based system, enter this command:

sudo useradd -c "GNU MediaGoblin system account" -d /var/lib/mediagoblin -m -r -g www-data mediagoblin

If you are using an RPM-based system, enter this command:

sudo useradd -c "GNU MediaGoblin system account" -d /var/lib/mediagoblin -m -r -g nginx mediagoblin

This will create a mediagoblin user and assign it to a group that is associated with the web server. This will ensure that the web server can read the media files (images, videos, etc.) that users upload.

We will also create a mediagoblin group and associate the mediagoblin user with that group, as well:

sudo groupadd mediagoblin && sudo usermod --append -G mediagoblin mediagoblin

No password will be assigned to this account, and you will not be able to log in as this user. To switch to this account, enter:

sudo su mediagoblin -s /bin/bash

To return to your regular user account after using the system account, type exit.

Create a MediaGoblin Directory

You should create a working directory for MediaGoblin. This document assumes your local git repository will be located at /srv/mediagoblin.example.org/mediagoblin/. Substitute your prefered local deployment path as needed.

Setting up the working directory requires that we first create the directory with elevated priviledges, and then assign ownership of the directory to the unprivileged system account.

To do this, enter the following command, changing the defaults to suit your particular requirements. On a Debian-based platform you will enter this:

sudo mkdir -p /srv/mediagoblin.example.org && sudo chown -hR mediagoblin:www-data /srv/mediagoblin.example.org

On an RPM-based distribution, enter this command:

sudo mkdir -p /srv/mediagoblin.example.org && sudo chown -hR mediagoblin:nginx /srv/mediagoblin.example.org

Note

Unless otherwise noted, the remainder of this document assumes that all operations are performed using this unprivileged account.

Install MediaGoblin and Virtualenv

We will now switch to our ‘mediagoblin’ system account, and then set up our MediaGoblin source code repository and its necessary services. You should modify these commands to suit your own environment.

Change to the MediaGoblin directory that you just created:

sudo su mediagoblin -s /bin/bash  # to change to the 'mediagoblin' account
$ cd /srv/mediagoblin.example.org

Clone the MediaGoblin repository and set up the git submodules:

$ git clone git://git.savannah.gnu.org/mediagoblin.git -b stable
$ cd mediagoblin
$ git submodule init && git submodule update

Note

The MediaGoblin repository used to be on gitorious.org, but since gitorious.org shut down, we had to move. We are presently on Savannah. You may need to update your git repository location:

$ git remote set-url origin git://git.savannah.gnu.org/mediagoblin.git

Set up the hacking environment:

$ ./bootstrap.sh && ./configure && make

(Note that if you’d prefer to run MediaGoblin with Python 3, pass in –with-python3 to the ./configure command.)

Create and set the proper permissions on the user_dev directory. This directory will be used to store uploaded media files:

$ mkdir user_dev && chmod 750 user_dev

Assuming you are going to deploy with FastCGI, you should also install flup:

$ ./bin/easy_install flup

(Note, if you’re running Python 2, which you probably are at this point in MediaGoblin’s development, you’ll need to run:)

$ ./bin/easy_install flup==1.0.3.dev-20110405

The above provides an in-package install of virtualenv. While this is counter to the conventional virtualenv configuration, it is more reliable and considerably easier to configure and illustrate. If you’re familiar with Python packaging you may consider deploying with your preferred method.

Note

What if you don’t want an in-package virtualenv? Maybe you have your own virtualenv, or you are building a MediaGoblin package for a distribution. There’s no need necessarily for the virtualenv produced by ./configure && make by default other than attempting to simplify work for developers and people deploying by hiding all the virtualenv and bower complexity.

If you want to install all of MediaGoblin’s libraries independently, that’s totally fine! You can pass the flag --without-virtualenv which will skip this step. But you will need to install all those libraries manually and make sure they are on your PYTHONPATH yourself! (You can still use python setup.py develop to install some of those libraries, but note that no ./bin/python will be set up for you via this method, since no virtualenv is set up for you!)

This concludes the initial configuration of the MediaGoblin environment. In the future, when you update your codebase, you should also run:

$ git submodule update && ./bin/python setup.py develop --upgrade && ./bin/gmg dbupdate

Note

Note: If you are running an active site, depending on your server configuration, you may need to stop it first or the dbupdate command may hang (and it’s certainly a good idea to restart it after the update)

Deploy MediaGoblin Services

Edit site configuration

A few basic properties must be set before MediaGoblin will work. First make a copy of mediagoblin.ini and paste.ini for editing so the original config files aren’t lost (you likely won’t need to edit the paste configuration, but we’ll make a local copy of it just in case):

$ cp -av mediagoblin.ini mediagoblin_local.ini && cp -av paste.ini paste_local.ini
Then edit mediagoblin_local.ini:
  • Set email_sender_address to the address you wish to be used as the sender for system-generated emails
  • Edit direct_remote_path, base_dir, and base_url if your mediagoblin directory is not the root directory of your vhost.

Configure MediaGoblin to use the PostgreSQL database

If you are using postgres, edit the [mediagoblin] section in your mediagoblin_local.ini and put in:

sql_engine = postgresql:///mediagoblin

if you are running the MediaGoblin application as the same ‘user’ as the database owner.

Update database data structures

Before you start using the database, you need to run:

$ ./bin/gmg dbupdate

to populate the database with the MediaGoblin data structures.

Test the Server

At this point MediaGoblin should be properly installed. You can test the deployment with the following command:

$ ./lazyserver.sh --server-name=broadcast

You should be able to connect to the machine on port 6543 in your browser to confirm that the service is operable.

The next series of commands will need to be run as a priviledged user. Type exit to return to the root/sudo account.:

exit

FastCGI and nginx

This configuration example will use nginx, however, you may use any webserver of your choice as long as it supports the FastCGI protocol. If you do not already have a web server, consider nginx, as the configuration files may be more clear than the alternatives.

Create a configuration file at /srv/mediagoblin.example.org/nginx.conf and create a symbolic link into a directory that will be included in your nginx configuration (e.g. “/etc/nginx/sites-enabled or /etc/nginx/conf.d) with one of the following commands.

On a DEB-based system (e.g Debian, gNewSense, Trisquel, *buntu, and derivatives) issue the following commands:

sudo ln -s /srv/mediagoblin.example.org/nginx.conf /etc/nginx/sites-enabled/
sudo systemctl enable nginx

On a RPM-based system (e.g. Fedora, RedHat, and derivatives) issue the following commands:

sudo ln -s /srv/mediagoblin.example.org/nginx.conf /etc/nginx/conf.d/
sudo systemctl enable nginx

You can modify these commands and locations depending on your preferences and the existing configuration of your nginx instance. The contents of this nginx.conf file should be modeled on the following:

server {
 #################################################
 # Stock useful config options, but ignore them :)
 #################################################
 include /etc/nginx/mime.types;

 autoindex off;
 default_type  application/octet-stream;
 sendfile on;

 # Gzip
 gzip on;
 gzip_min_length 1024;
 gzip_buffers 4 32k;
 gzip_types text/plain application/x-javascript text/javascript text/xml text/css;

 #####################################
 # Mounting MediaGoblin stuff
 # This is the section you should read
 #####################################

 # Change this to update the upload size limit for your users
 client_max_body_size 8m;

 # prevent attacks (someone uploading a .txt file that the browser
 # interprets as an HTML file, etc.)
 add_header X-Content-Type-Options nosniff;

 server_name mediagoblin.example.org www.mediagoblin.example.org;
 access_log /var/log/nginx/mediagoblin.example.access.log;
 error_log /var/log/nginx/mediagoblin.example.error.log;

 # MediaGoblin's stock static files: CSS, JS, etc.
 location /mgoblin_static/ {
    alias /srv/mediagoblin.example.org/mediagoblin/mediagoblin/static/;
 }

 # Instance specific media:
 location /mgoblin_media/ {
    alias /srv/mediagoblin.example.org/mediagoblin/user_dev/media/public/;
 }

 # Theme static files (usually symlinked in)
 location /theme_static/ {
    alias /srv/mediagoblin.example.org/mediagoblin/user_dev/theme_static/;
 }

 # Plugin static files (usually symlinked in)
 location /plugin_static/ {
    alias /srv/mediagoblin.example.org/mediagoblin/user_dev/plugin_static/;
 }

 # Mounting MediaGoblin itself via FastCGI.
 location / {
    fastcgi_pass 127.0.0.1:26543;
    include /etc/nginx/fastcgi_params;

    # our understanding vs nginx's handling of script_name vs
    # path_info don't match :)
    fastcgi_param PATH_INFO $fastcgi_script_name;
    fastcgi_param SCRIPT_NAME "";
 }
}

The first four location directives instruct Nginx to serve the static and uploaded files directly rather than through the MediaGoblin process. This approach is faster and requires less memory.

Note

The user who owns the Nginx process, normally www-data or nginx, requires execute permission on the directories static, public, theme_static and plugin_static plus all their parent directories. This user also requires read permission on all the files within these directories. This is normally the default.

Nginx is now configured to serve the MediaGoblin application. Perform a quick test to ensure that this configuration works:

nginx -t

If you encounter any errors, review your nginx configuration files, and try to resolve them. If you do not encounter any errors, you can start your nginx server with one of the following commands (depending on your environment):

sudo /etc/init.d/nginx restart
sudo /etc/rc.d/nginx restart
sudo systemctl restart nginx

Now start MediaGoblin. Use the following command sequence as an example:

cd /srv/mediagoblin.example.org/mediagoblin/
su mediagoblin -s /bin/bash
./lazyserver.sh --server-name=fcgi fcgi_host=127.0.0.1 fcgi_port=26543

Visit the site you’ve set up in your browser by visiting <http://mediagoblin.example.org>. You should see MediaGoblin!

Note

The configuration described above is sufficient for development and smaller deployments. However, for larger production deployments with larger processing requirements, see the “Considerations for Production Deployments” documentation.

Apache

Instructions and scripts for running MediaGoblin on an Apache server can be found on the MediaGoblin wiki.

Should I Keep Open Registration Enabled?

Unfortunately, in this current release of MediaGoblin we are suffering from spammers registering to public instances en masse. As such, you may want to either:

  1. Disable registration on your instance and just make accounts for people you know and trust (eg via the gmg adduser command). You can disable registration in your mediagoblin.ini like so:

    [mediagoblin]
    allow_registration = false
    
  2. Enable a captcha plugin. But unfortunately, though some captcha plugins exist, for various reasons we do not have any general recommendations we can make at this point.

We hope to have a better solution to this situation shortly. We apologize for the inconvenience in the meanwhile.

Security Considerations

Warning

The directory user_dev/crypto/ contains some very sensitive files. Especially the itsdangeroussecret.bin is very important for session security. Make sure not to leak its contents anywhere. If the contents gets leaked nevertheless, delete your file and restart the server, so that it creates a new secret key. All previous sessions will be invalidated.